Bora PURU2R

Soften dried-on dirt rather than scraping it away.

1. 1

   Wipe the surfaces

   Use a soft, damp cloth with detergent or mild window cleaner on the extraction-system surfaces. Soften dried-on dirt with a damp cloth; do not scrape.

Weekly, or sooner: After very greasy cooking

Clean at least weekly, and sooner after very greasy cooking. Also clean when the recirculation filter-service display appears; grease cleaning does not replace odour-filter replacement or reset its life.

1. 1

   Lift out the parts

   Lift out the air inlet nozzle, then lift the stainless-steel grease filter by its handle.

   

   

Every 6 months, or sooner: When replacing the odour filter

The removable housing base is beneath the cooktop inside the floor unit.

1. 1

   Isolate the power

   Switch off, allow to cool and safely disconnect the appliance from the mains before opening covers near the fan.

2. 2

   Open and clean

   Remove the inlet nozzle, grease filter and filter-replacement cover. Release all six locks around the housing base and remove the base. Clean the housing and base with a mild cleaning agent.

   

Yearly, or sooner: At 150 hours or filter warning

Recirculation models only: the filter life is 150 operating hours (about one year). Replace sooner for odour build-up, weaker extraction or F.

1. 1

   Remove the used filter

   Switch the appliance off. Lift out the inlet nozzle and grease filter. Pull the replacement cover out through the opening in the filter housing. Grip the old filter's strap, pull it out as far as possible, then pull upwards and rotate it out through the inlet opening.

   

   

Deal with spills and debris promptly to prevent marks and scratching.

1. 1

   Remove loose debris

   Remove crumbs, grains and similar debris immediately so they cannot scratch the surface. Wipe boiled-over food with a damp cloth.

2. 2

   Handle sticky spills

   Remove melted plastic, aluminium foil and sugar or sweet food from the hot cooking zone immediately with a glass-ceramic scraper. Take care around hot surfaces.

3. 3

   Clean the cooled glass

   Once cool, remove coarse residues with a glass-ceramic scraper. Spread suitable glass-ceramic cleaner with kitchen paper or a clean cloth, wipe with a damp cloth and dry with a clean cloth.

Remove dirt promptly so the touch controls remain clear.

1. 1

   Wipe gently

   On the switched-off, cooled appliance, wipe the controls with a lightly dampened soft cloth and a suitable non-abrasive cleaner. Keep liquid out of the appliance.

Replace the stainless-steel filter if cleaning no longer removes all dirt.

1. 1

   Fit the replacement

   Lift out the inlet nozzle and old filter using its handle. Put in a clean, dry replacement grease filter compatible with Pure 2, then refit the inlet nozzle.